Tedlar Gas Sampling Bag

 Tedlar® PVF film is strong, durable, and considered chemically inert to a wide range of compounds. Tedlar gas sampling bag can be used in high precsion PPM level analysis sampling, can sample and save all kinds of corrosive gas and liquid samples, and used to solid VOCs residual detection.

Operating guide:

• Inflation pressure: Avoid filling pressure higher than 6000Pa. Fill gas until the bag is fully expanded, however, it is not so tense when you press it using your finger.
• Operating temperature: Working temperatures should be -60°C to +100°C for PTFE connector and -20°C to +80°C for PC stopcock valve .
• Storage and use: Keep away from flame and high temperature when filling and storage. Avoid contacting sharp stuff.
• Gas exchanging: Before use, flush sampling bags three times with the gas you want to fill.
• Needle sampling: When using a needle to draw gas from highly elastic septum, squeeze the septum with fingers in order to restore the sealing property after pulling out the needle.

-----------------------------------------

• Note:

  Product delivery duration may vary due to product availability in stock.
  

  Disclaimer: The color of the physical product may slightly vary due to the deviation of lighting sources, photography or your device display settings.

  প্রদত্ত দাম ক্যামিকেলের গ্রেড, পণ্যের একক, সাইজ বা মডেল এবং প্রচলিত বাজার দাম বিবেচনায় কম/বেশি বা পরিবর্তন হতে পারে।ডেলিভারি দেয়ার আগে প্রতিটি পণ্যের বর্তমান দাম সম্মানিত ক্রেতা/ গ্রাহকের সাথে পুনরায় মোবাইলে নিশ্চিত করা হয়। 

  চট্টগ্রাম শহরের বাইরে অনিবন্ধিত কাস্টমার/প্রথম অর্ডারের ক্ষেত্রে দামের ১০% অথবা ডেলিভারি চার্জ অগ্রিম প্রদান করতে হবে।